PRODUCTS

Axle KRX802

Large format, high pressure powered stereo system

The largest of our Axle line is the Axle-KRX802. With three Dragon-KX12 12" speakers combined with a heavy hitting dual 18" Thunder-KMT218 subwoofer per side in a stereo configuration, the system converts into a line array that delivers maximum SPL, very low frequency and the best bass response. No longer a point source, the Axle-KRX802 covers larger distances with higher pressure in larger venues.

Features

High Pressure in the Near Field

Four-Corner Port Configuration

Color Customizable

Selectable Coverage

Integrated DSP

Dante Compatible

Self-Powered Capabilities

Onboard Touch Screen

Applications

Theatrical reinforcement

Concert Halls

Touring and fixed film and television system

Religious Venues

Frontfill and Downfill system

Stage and Studio

Specifications

Thunder-KMT218

Acoustics
Power Handling	1600 W (AES)
Impedance	4 Ohm
Frequency range	30 Hz - 150 Hz ± 3dB (preset relating)
Maximum SPL	134 dB (cont.) – 140 dB (peak)
Coverage
Horizontal	Omni°
Vertical	Omni°
Crossover
Coaxial	Internal DSP controlled
Frequency	Low pass @ 150 Hz (maximum - preset dependent)
Transducers
Full-range	2 X 18” neodymium magnet woofer with 3” voice coil
Amplifiers
Type	1 Class D module - DSP controlled
Power	2000 W @ 4 Ω 1% THD + NOISE
Protection	Over Temp.(Power Limiting – Thermal Shut- down), Short Circuit/Overload Output Protection, Power Limiting, Clip Limiter/Permane
Physical Overview
Dimension	94.9 x 48 x 60.0 cm (37.36“ x 18.89” x 23.62“)(1)
Weight	49.0 Kg (108.02 lb)

Dragon-KX12

Acoustics
Power Handling	800 + 200 W
Impedance	8 Ohm
Frequency range	120 Hz - 19 KHz
Maximum SPL	127 dB continuous - 133 dB peak
Coverage
Horizontal	100°/30° (depending on horn orientation)
Vertical	30°/100° (depending on horn orientation)
Crossover
Coaxial	External Crossover required
Frequency	High pass @ 120 Hz, 24 dB/oct suggested minimum
Transducer
Full-range	12” neodymiun magnet woofer with 3” voice coil Neodymium magnet compression driver with 2”voice coil
Power Audio Imput
Connectors	2 x 4-pin Speakon
Wiring	1+ 1- (Signal IN & LINK ) 2+ 2- (Through)
Recommended Amplifiers
Type	KMT18, KMT21, KMT218, KA84
Physical Overview
Dimensions	34.0 x 32.0 x 20.0 cm (13.38”x 12.59”x 7.87”) (1)
Weight	12.2 Kg (26.89 lb)