TR—825

                            UHF Two-Channel Binaural Wireless Beltpack

Features:

On/Off & Volume Control

Turns the beltpack power on and controls head set volume.

Wireless Talk Around (WTA)

When pressed, the user’s audio is disconnected from the wired intercom, auxiliary input/output and the base station’s local headset. Other beltpack users, on that audio channel, can hear the user as normal.

Stage Announce (SA)

When pressed, the user’s audio is routed to the stage announce connector on the back of the base station. The user also loses their sidetone as an indication that stage announce is activated. The other wireless beltpacks and wired users do not hear the user’s audio. The button is non-latching and activates the nearby red LED.

Audio Channel Select Button

Allows user to select either audio channel A or B.

Bat/Overmod Light (BAT/OM)

Light will flash once when unit is turned on if the battery is good. If the light stays on, battery is low. If the light does not flash, battery is dead. A normal microphones gain setting will cause the LED to flash at the beginning of most words at normal speech levels. If the gain is too high, the LED will be red during the complete word at normal speech levels.

Talk Light

LED is on when the talk button, SA or WTA is active.

Talk Button

Press to enable the audio path from the local headset microphones. The “TALK” LED, #6, will turn red when enabled. A quick press and release latches the talk function, unless latching has been disabled. Holding the button for over ½ a second will cause the audio path to be enabled only for as long as the button is held. If the talk function is latched on, pressing the talk button again will turn it off. 

Specifications:

Antenna                                   ¼ Wave (supplied), Screw type, Replaceable TX and RX

Binaural                                    Yes

Color                                    Black

Current Draw                            190 mA Push-to-Talk, A and B Talk On

Depth                                    2.02" (51.3 mm)

Distortion                            < 1 % at full deviation

FCC ID                                     B5DM517

Form Factor                             Beltpack

Frequency Response             300 Hz-8 kHz

Function                                      User Station

Height                                       5.35" (135.9 mm)

IF Selectivity                               3 dB at 230 kHz

Image Rejection                        70 dB or better

Local Headset Output                 40 mW output into 600W 1% distortion

Microphones Input Sensitivity 7 mV

Power Requirements                 6 “AA” Cells Alkaline NiMH optional

RF Frequency Range                 470 - 608 MHz, 614 - 740 MHz in 18 MHz TX and RX bands

RF Frequency Stability                 0.01 %

RF Sensitivity                                 < 0.7 μV for 12 dB SINAD

Squelch Quieting                         90 dB

Squelch Threshold                         20 dB SINAD About 1.0 μV

Storage Temperature                  -4° F to 130° F (-20° C to 55 °C

Type                                         Dual Conversion Super heterodyne, Synthesized, FM, 712 channels

Weight                                         1.31 lbs (0.6 kg)

Width                                          3.75" (95.3 mm)